Gramazio Kohler Research
News
Lehre
Forschung
Projekte
Publikationen
About
Team
Offene Stellen
Kontakt
FAA Revisited
Semiramis
Collaborative Constructions
Circularity Park
Touch Wood
Acoustic Panel System
OpenHouse
Research as Architecture - A Laboratory for Houses, Homes and Robots
IRoP: Interactive Robotic Plastering
Immersive Design Lab
Clay Rotunda
Designlabor
Augmented Bricklaying
Future Tree
DFAB HOUSE
Augmented Acoustics
Rock Print Pavilion
Villa Bernasconi
Robotic Pavilion
Robotic Cosmogony
Sisyphus
Gramazio Kohler Retrospektive
Mutations-Créations / Imprimer le monde
Hello, Robot
Reinforce Expose
Robotic Fabrication Laboratory
Das Sequenzielle Dach
Rock Print
Iridescence Print
Robotic Foldings
Flight Assembled Architecture
Die endlose Wand
Stratifications
The Catenary Pavilion
Pike Loop
Der aufgestapelte Pavilion
Architonic Concept Space
Structural Oscillations
R-O-B
Superwood
Weingut Gantenbein


Clay Rotunda, SE MusicLab, Bern, 2020-2021
The Clay Rotunda is a free-standing earth-based cylindrical structure constituting the outer, soundproof shell of the SE MusicLab, a high-fidelity music auditorium built inside the newly refurbished Gurten Brewery in Bern. The cylindrical structure combines clay, a sustainable zero-waste building material, with computational design techniques. Featuring a diameter of almost 11 meters the structure reaches a height of 5 meters with just 15 cm of unreinforced clay. It was built in-situ by a mobile robotic system that aggregated over 30’000 soft clay bricks over a period of 50 days.


Design
The extreme slenderness of the Clay Rotunda is made possible by its undulated design, which allows to increase the footprint and stabilize the structure in order to prevent buckling effects. The computational model that controls the geometry of this thin shell was designed by taking into account the structural models of the engineers, the material properties of the clay as well as the sequencing of the building process. In fact, the limited reach of the robotic arm and the shrinking of the material while drying demanded the implementation of complex strategies for the horizontal and vertical segmentation of the structure into matching trapezoids. The computational model also allowed computing the building sequence within each segment as well as the position of each one of the 30’000 clay cylinders. The particular orientation in which the robotic arm pressed them onto the structure was particularly important to ensure proper bonding between the different segments. Finally, the model contains all the fabrication data needed to run the robotic process that allows the realization of bespoke structures of unmatched geometry complexity.

Material and process
The optimisation of the material system is key for the performance of the structure. For the Clay Rotunda different compositions of clay, sand, small stones and water have been tested with the aim of finding the best balance between the malleability needed by the fabrication process, the highest compressive strength, and the minimal material shrinkage. The developed clay mix is extruded into so-called soft bricks, cylinders with a diameter of 9 cm and a height of 15 cm, which are grabbed by the robotic arm from a picking station, precisely oriented, and sequentially pressed into their final position. The compression of about 60% of the original height assures a strong and interlocking aggregation, leading to a soft bond that expresses both the plasticity of the material and the dynamic forces of the fabrication process. The custom robot - the in-situ fabricator - had to be moved for every single segment in order to address the full scale of the structure. This relocation of the robot as well as the deformation of the fresh material caused by its shrinkage required a regular acquisition of the as-built geometry through 3D scanning. The unavoidable cracks that resulted from the drying process were actively monitored and regularly filled with the same clay mix.

Sustainability
The Clay Rotunda addresses the urgent need of reducing the material consumption as well as revert to emission-free materials for the fabrication of our built environment. The robotic clay aggregation process combines the traditional knowledge of clay constructions with contemporary digital design and fabrication processes. The increased degree of control on both material and process allows building complex structures that go beyond what has traditionally been possible. Clay also has excellent properties in regulating the interior climate of buildings, thus reducing the need for mechanical ventilation and creating comfort for all inhabitants. Finally, earthen constructions are entirely waste-free, since the used clay mix can be ground and fully reused. What is taken from nature can be returned entirely to nature.

Partnerships
The Clay Rotunda has acted as a catalyst for the knowledge transfer between research and industry. It has been realized in collaboration with multiple partners that contributed to its successful realization with their specific knowledge and experience: Lehmag, a construction company specialized in earthen construction and interested in combining new technologies with traditional construction methods, Seforb, an engineering company with a focus on the structural design of earthen structures and Brauchli Ziegeleien, a leading brick producer committed to a less CO2 intense brick production. Finally, this innovative architectural experiment would not have been possible without the vision and engagement of the client and initiator, SE MusicLab.

The project builds upon the work conducted within the MAS DFAB.
See also:
Rapid Clay Formations (Rio)
Rapid Clay Formations (Brunnen)
In Situ Fabricator

Credits:
Gramazio Kohler Research, ETH Zürich

Auftraggeber: SE MUSICLAB - Jürgen Strauss, Manuel Frick, Filippo Melena, Anna Imfeld-Aebischer, Markus Imfeld
Mitarbeiter: Coralie Ming (Projektleitung), David Jenny, Hannes Mayer, Edurne Morales, Anton Johansson, Indra Santosa, Jomana Baddad, Nicolas Feihl, Selen Ercan Jenny, Jesus Medina, Karol Wojtas
Support: Mike Lyrenmann and Philippe Fleischmann (Robotic Fabrication Laboratory, ETH Zurich), Andi Reusser (Institute for Building Materials, ETH Zurich)
Ausgewählte Experten: Seforb Sàrl - Joerg Habenberger, Gotham design studio
Ausgewählte Unternehmer: LEHMAG AG - Felix Hilgert
Industrie Partner: Brauchli Ziegelei AG, Wirz AG Bauunternehmung
Sponsoren: Wirz AG Bauunternehmung, Welti Furrer, Eberhard, Siemens, Geberit, ETH Zürich Foundation


Copyright 2023, Gramazio Kohler Research, ETH Zurich, Switzerland
Gramazio Kohler Research
Professur für Architektur und Digitale Fabrikation
ETH Zürich HIB E 43
Stefano-Franscini Platz 1 / CH-8093 Zürich

+41 44 633 49 06
Follow us on:
Vimeo | Instagram